Actual Steps for Using Industrial Chiller Unit

Conventional chillers are integrated structures that produce significant noise during operation, causing noise pollution for users. This makes it difficult to operate for long periods of time. Additionally, conventional chillers are large and cumbersome, occupying a lot of space. For limited spaces, they are inconvenient to use and cost a lot.

Split-type industrial chiller structure

A split-type industrial chiller machine is made up of an outdoor unit and an indoor unit connected by pipes. The outdoor unit consists of a finned condenser and a radiator fan, while the indoor unit consists of a compressor, water pump, evaporator, temperature display control chiller mechanism, and water tank. The outdoor unit emits noise and heat, which reduces noise within the indoor environment without generating too much heat.

Installation requirements for split-type industrial chiller machine

Split-type industrial water chiller must be installed separately and has high requirements for their placement. The outdoor unit must be installed in a well-ventilated location with shade and clean surroundings.

Application environment for split-type industrial chiller machine

Split-type industrial chillers are suitable for experimental and research centers, academic research institutions, etc. The low noise level of the indoor unit during operation makes it ideal for sites with strict production environment requirements.

Steps for using the industrial chiller machine

Firstly, according to the manufacturer's instructions, all routes must be secure before using the industrial water chiller unit. Then, turn on the manual switch and open the exhaust valve of the air compressor at the same time, and observe the position of the valve pointer. If it is within the normal range, the industrial chiller unit can operate normally.

Secondly, turn on the electric heating button. When the environmental temperature reaches above 40 degrees Celsius, turn off the heating button immediately. The entire heating process for the industrial chiller unit is relatively short and only takes a few minutes.

Thirdly, start the water pump's operation button. You will hear the industrial chiller machine unit's water pump gradually supplying electricity, and then it will gradually use the primary functions of the cooling tower to operate successfully.

Since its establishment, SOXI has always adhered to the business principle of putting people first and emphasizing honesty. They have gathered industry elites to combine foreign advanced information technology, management methods, and business experience with domestic practical experience to provide a full range of automation solutions for plastic auxiliary machines. This helps companies improve their management and production capabilities, maintain competitiveness in fierce market competition and achieve rapid and stable development. The company's experience combined with the practical experience of domestic enterprises provides a full range of automation solutions, helping companies improve their management and production capabilities, maintain competitiveness in fierce market competition, and achieve rapid and stable development.

Popular Plastic Molding & Auxiliary Machinery Products

Air Cooled Water Chiller

Dehumidifying Dryer (Standard Type)

Masterbatch Mixer

Hot Plastic Molding & Auxiliary Machinery Blogs