The hot air hopper dryer is a replacement product of the hot air dryer. The environmental protection factor is fully considered and improved based on the original function. It can dry raw materials that are wet due to packaging, shipping, or recycling.
The hot air hopper dryer blows constant high-temperature wind into the drying barrel through the drying fan in the raw material processing. After baking the raw materials, the original moisture of the raw materials in the barrel is taken away to remove the moisture in the raw materials. The windblown by the fan becomes high-temperature dry, hot air after being heated by electric heating. The hot air can be evenly dispersed in the raw material in the drying barrel through the screen protector and the hole screen—an optional hot air recovery device. After being filtered by the return air, the blown air enters the drying fan to form a closed circulation loop, saving electricity.
The hot air hopper dryer is the most effective and economic model for drying plastic raw materials. It can dry raw materials that are wet due to packaging, transportation, or recycling. The direct-type design is particularly suitable for directly installing the plastic molding machine for drying, which is fast and space-saving. This up-blowing hot-air dryer can provide a loading capacity of 12~1000 kg, divided into thirteen types.
1. Adopt a high-performance hot air diffusion device that evenly disperses hot air to keep the plastic drying temperature uniform and increase drying efficiency.
2. The hot air hopper dryer has a special hot-air elbow design, preventing dust from accumulating on the bottom of the electric heating tube and causing combustion.
3. The inside and internal parts of the barrel are all stainless steel.
4. The material barrel is separated from the bottom, easy to clean, and quick to change materials.
5. The proportional deviation indicating temperature controller is used to control the temperature accurately.
6. Double overheating protection devices reduce accidents caused by artificial or mechanical failures.
7. Various models provide preheating timing devices, microcomputer control, and double-layer insulation material barrel options.
8. Provide intermittent drying methods to save electricity.
9. Transparent window type magnet base.
The Soxi Intelligent hot air hopper dryer can be directly installed on the plastic injection machine. Hot air enters evenly from bottom to top to ensure a good drying effect. The middle of the barrel is an openable structure for easy cleaning. The air volume can be adjusted according to actual needs to adapt to different drying requirements. The PID temperature control logic ensures the accuracy of the hot air temperature. It is equipped with safety protection such as over-temperature and overload to ensure safe production.