How to Use the Mold Temperature Machine Correctly?

To improve product quality, reduce scrap rate, and save manpower and resources in the production process, precise temperature control is crucial. It is said that mold temperature control machines are required for production transformation, but they are unfamiliar. Choosing a mold temperature machine, however, does not know how to use it. After reading this article, four steps can solve the problem of how to operate the mold temperature machine.

Mold temperature machine is a mechanical equipment that exists when the industry has developed to a certain stage. In production factories where international competition is increasingly fierce, automation machinery equipment can save a lot of manpower and resources. And improving product quality can save costs and increase product market competitiveness. The mold temperature machine can accurately control the temperature of the mold, improve product quality, and operate intelligently and automatically.

Checking the Mold Temperature Machine before Use

Check whether the water and oil (heat transfer medium) of the mold temperature machine are within the lowest standard liquid level range, whether the pressure gauge is zero (if the pressure gauge is not zero when starting, it is easy to cause malfunction), whether the mold temperature machine and the mold (other temperature control machinery) and connection ports are correct, whether they leak water or oil, and if there are any problems during operation, please contact the technical personnel of the mould temperature controller manufacturers in time.

Monitoring the Operation of the Mold Temperature Machine

Turn on the control panel, enter the operation interface, set the temperature (note that the set temperature must be lower than the temperature of the oil outlet), start the oil pump and check whether the direction of the oil pump and the fan are correct, and then make sure that the fan and the oil pump can run normally before proceeding to the next step; there is also a point to note the wiring problem of the mold temperature machine.

Fill the Mold Temperature Machine with Oil

Put a little oil during the test, and if there are no problems during the test, add more; add heat transfer oil to the oil tank, circulate the heat transfer oil through the heat transfer oil, and input the heat transfer oil into various parts of the carrier oil body. And then start a series of temperature control operations such as heating, heat transfer, constant temperature, and cooling.

Observe the Mold Temperature Machine During Operation

Let the mold temperature machine work for a while and observe whether there is any leakage of gas and whether the pipeline leaks. At the same time, during the operation of the mold temperature machine, we also need to determine whether the pressure is normal and the safety of various environment temperatures.

Although the mold temperature machine is an intelligent automatic temperature control equipment, attention should be paid to the smooth, safe and reasonable layout of the space around the mold temperature machine during installation, in order to facilitate maintenance. If a malfunction occurs during normal use, do not operate or try to repair it like a simple machine. Special technical personnel are required to perform maintenance operations, which is not only good for the temperature control equipment, but also for the after-sales service of the company. To learn more about mold temperature machines, please pay attention to Shouxi. The mold temperature machine manufacturer provides after-sales service.

Popular Plastic Molding & Auxiliary Machinery Products

Hopper Loader (Positive Pressure)

Water Cooled Screw Chiller

Fast Blade Type Plastic Crusher

Hot Plastic Molding & Auxiliary Machinery Blogs