Method of Using Central Conveying System and the Benefits of It‘s’ Installation

The central conveying system is applied in industrial production, and can flexibly change the feeding amount according to the production volume of different molding machines. With the design of multiple feeding pipelines, it can meet the requirements for diversification of main materials and is an indispensable equipment in enterprise production workshops.

1. Notes on the use of the central conveying system

• Before starting the central conveying system, try to manually rotate the transmission wheel for one or two turns to confirm that it can operate flexibly. Then turn on the power and wait for the central conveying system to operate normally before starting to feed.

• During the operation of the central conveying system, ensure uniform feeding to avoid overloading. Also, be careful to prevent other broken objects from falling into the machine.

• During the use of the central conveying system, if any parts show signs of wear or damage, they should be promptly repaired or replaced with new parts.

• In the working process of the central conveying system, ensure that the bearings have good lubrication and pay attention to whether the bearing temperature is too high. Once abnormal noise or vibration is detected, stop the machine for inspection to see if there is a fault and timely repair it.

• If the central conveying system needs to stop running, it should stop feeding first, and then drain the remaining materials in the machine before cutting off the power supply of the motor.

• When the central conveying system is shut down, check the bolts to see if they are loose and tighten them firmly.

The above content is about the notes on the use of the central conveying system. In daily work, it is necessary to regularly maintain the central conveying system to avoid failure and prolong its service life, which can bring more benefits to enterprises and save production costs.

2. Advantages of installing the central conveying system

The central conveying system is designed specifically for the injection molding industry. It can realize automatic production, not only greatly improving work efficiency, but also improving product molding quality. At present, many enterprises have installed and used the central conveying system.

• The central conveying system adopts PLC technology, which can realize production automation, and is easy to operate without the need for professional management.

• The central conveying system is fully equipped with special accessories for raw material → storage → measurement → drying → conveying → use, which can be used in different production environments.

• The central conveying system can realize highly automated control and monitoring, and can meet the production needs of 24-hour uninterrupted operation, improving production efficiency.

• The central conveying system has an independent centralized dust collection system, which can effectively avoid waste and quickly clean it, reducing the pollution level of the injection molding factory and keeping the production workshop clean and tidy.

• The central conveying system can centrally manage raw materials, and the dry material barrel is installed in isolation, which can not only increase space utilization, but also reduce dust pollution, creating a comfortable production environment.

Popular Plastic Molding & Auxiliary Machinery Products

IMM Injection Molding Machine

Steam Mold Temperature Machine (Switching Control)

Dehumidifying Dryer (Standard Type)

Hot Plastic Molding & Auxiliary Machinery Blogs